UF resin for Aquaculture UF resin for Wood Industry Re-Dispersible Emulsion Powder
UF RESIN FOR WOOD INDUSTRY
 
JB-2
Urea-formaldehyde (UF)resin is a thermosetting resin made out by a condensation polymerisation reaction between urea and formaldehyde.
UF Resin is the most popular resin used in Wood Panel product industry owing to its very high reactivity and economics of cost proven over the period of time.
Magicoh™ JB-2 is a spray-dried Urea Formaldehyde resin with no addition of filler, modifier or hardener. It is supplied in powder form for the convenience in shipping and handling for the overseas users. Magicoh™ JB-2 has a shelf life as long as twelve months when properly stored.
 
 
Technical Data
Appearance : White powder
Particle size: 80mesh (90% passing)
pH (50% solution) : 7.5-8.0
Total nitrogen: 29.5%
Moisture content : <3%
 
Application of UF Powder Resin

Magicoh™ JB-2 is chiefly used as binder in wood panel products like plywood, particle board, MDF, OSB etc, besides its application in HPL industry as adhesive for impregnation of Papers.

It is also used in textile sizing, paper industry, laminated or corrugated box manufacturing as additive to substitute traditional binders made of starch.

 
Handling & Storage

Magicoh ™ JB-2 should be stored in the original bags in a cool and dry place protected from heat and water.
Handle in accordance with good industrial hygienic and safety procedure.

 
Packaging

Packed in paper bags of 25 KG with polythene liner.

 
Recommended Formulations

As binder in wood panel product industry
Following is a recommended formulation for usage of Magicoh™ JB02 in panel product industry.

Component Particle Board
Magicoh™ JB-2 78 kg
Water 60 kg
Wheat flour (as extender) 5 kg
Limestone powder (as filler) 15 kg
Ammonium Chloride (as hardener) 2 kg
Pot Life > 1 hr
The addition of extender,filler and hardener is dependence upon application and mechanical condition. Consult us for more suggestions.
 
Method of preparation:
  • Pour about 2/3 of the required water for the total needed mixing glue into the mixer and let it run.
  • Add the whole Magioch JB-2 gently, while mixer is running. Mix until a homogeneous liquid is obtained.
  • Continue mixing while adding the remaining 1/3 of the water to the mixer. Add other extenders and filler.
  • When the liquid is free of bubble, the glue is ready to be used
Magicoh™ is a trade mark of Huzhou International Trade Co Ltd.
Copyright © Huzhimpex, E-mail:hiecmaster@huzhimpex.com