|
|
| |
 HJ-1 |
|
| Manufacturer
ISO9002 certified |
 |
|
|
|
|
|
"Hydrostability" is a unique requirement
aquatic feed producers face, that is how to maintain
the integrity of pelleted and extruded feeds
in an aquatic environment.
Most binders used in aquatic feed work great, until
they are exposed to water. Then, they fall apart, deteriorating
rapidly, leaving costly feed ingredients unused with
the residue disolving in water and polluting pond bottoms.
|
|
| |
|
MagicohTM HJ-1 provides a cost efficient
solution to your binder needs, which increases the hydrostability
(water resistance) of your aquatic feed and finally improves
your return on investment.
With MagicohTM HJ-1, you can produce
a feed that remains palatable as long as eight hours. That means more efficient use of feed, less waster and decayed matter on pond bottoms.
|
| |
|
|
| MagicohTM HJ-1 is a spray-dried urea-formaldehyde
resin in powder form.It is recommended for use as feed binder
in the production of fish and shrimp feed, featuring excellent
water tolerance and is applicable in both cold and hot press
systems for pelleted or extruded feeds. |
| |
|
Tests on aquatic feed using MagicohTM
HJ-1 as a binder have proved MagicohTMHJ-1:
- Improve pellet hydrostability.
- Low inclusion, save cost.
- Reduce dust and feed losses.
- Reduce trucking and storage cost.
- Work effectively for all aquatic environments.
- Long shelf life as 12 months.
|
 |
|
| |
MagicohTM has been successfully
used for over twenty years worldwide in aquatic
feeds that are pelleted, cubed, or blocked. |
| |
| Table: Test result on water
tolerance with MagicohTM HJ-1 as feed
binder (for your reference only) |
| |
4 hrs |
36 hrs |
72 hrs |
| 0.5% |
45 munites |
1.5 hrs |
>2.0 hrs |
| 0.6% |
45 munites |
2.5 -6.0 hrs |
3.0 - 8.0 hrs |
| 0.7% |
45 munites |
3.0 - 8.0 hrs |
4.0 - 12.0 hrs |
|
| Note : |
|
|
|
|
| 1.-- |
The consumption level |
2.-- |
Post-cool time. |
3.-- |
Water tolerance |
|
|
| |
|
MagicohTMHJ-1 can also be used in all diets for poultry and swine.
|
|
|
It is used only as a pellet binder. Add the binder directly
to the feed mixer prior to being granulated
at consumption rate 0.4% - 0.7% of the finished pellets,and
process with nomal pelleting or extruding
operation. Post cool the finished pellets for recommended time
is neccesary for stability improvement. |
